Note: this is an abstract component that cannot be instantiated.
Error Log Publishers are responsible for distributing error log messages from the error logger to a destination.
Error log messages provide information about any warnings, errors, or significant events that are encountered during server processing.
The following Error Log Publishers are available in the server :
These Error Log Publishers inherit from the properties described below.
The Error Log Publisher component inherits from the Log Publisher
The following components have a direct aggregation relation from Error Log Publishers:
The properties supported by this managed object are as follows:
| General Configuration Basic Properties: | Advanced Properties: |
|---|---|
| description | None |
| enabled | |
| logging-error-behavior | |
| Log Messages To Include Basic Properties: | Advanced Properties: |
| default-severity | None |
| override-severity | |
| Filtering Criteria Basic Properties: | Advanced Properties: |
| log-message-exclusion-policy | None |
| Property Group | General Configuration |
| Description | A description for this Log Publisher |
| Default Value | None |
| Allowed Values | A string |
| Multi-Valued | No |
| Required | No |
| Admin Action Required | None. Modification requires no further action |
| Property Group | General Configuration |
| Description | Indicates whether the Log Publisher is enabled for use. |
| Default Value | None |
| Allowed Values | true false |
| Multi-Valued | No |
| Required | Yes |
| Admin Action Required | None. Modification requires no further action |
| Property Group | General Configuration |
| Description | Specifies the behavior that the server should exhibit if an error occurs during logging processing. |
| Default Value | standard-error |
| Allowed Values | standard-error - Write a message to standard error in the event of a logging failure. lockdown-mode - Place the server in lockdown mode in the event of a logging failure. |
| Multi-Valued | No |
| Required | No |
| Admin Action Required | None. Modification requires no further action |
| Property Group | Log Messages To Include |
| Description | Specifies the default severity levels for the logger. |
| Default Value | fatal-error severe-warning severe-error |
| Allowed Values | all - Messages of all severity levels are logged. none - No messages of any severity are logged by default. This value is intended to be used in conjunction with the override-severity property to define an error logger that will publish no error message beside the errors of a given category. fatal-error - The error log severity that is used for messages that provide information about fatal errors which may force the server to shut down or operate in a significantly degraded state. info - The error log severity that is used for messages that provide information about significant events within the server that are not warnings or errors. mild-error - The error log severity that is used for messages that provide information about mild (recoverable) errors encountered during processing. mild-warning - The error log severity that is used for messages that provide information about mild warnings triggered during processing. notice - The error log severity that is used for the most important informational messages (i.e., information that should almost always be logged but is not associated with a warning or error condition). severe-error - The error log severity that is used for messages that provide information about severe errors encountered during processing. severe-warning - The error log severity that is used for messages that provide information about severe warnings triggered during processing. debug - The error log severity that is used for messages that provide debugging information triggered during processing. |
| Multi-Valued | Yes |
| Required | No |
| Admin Action Required | None. Modification requires no further action |
| Property Group | Log Messages To Include |
| Description | Specifies the override severity levels for the logger based on the category of the messages. Each override severity level should include the category and the severity levels to log for that category, for example, core=mild-error,info,mild-warning. Valid categories are: core, extensions, protocol, config, log, util, schema, plugin, jeb, backend, tools, task, access-control, admin, replication, version, quicksetup, admin-tool, dsconfig, user-defined. Valid severities are: all, fatal-error, info, mild-error, mild-warning, notice, severe-error, severe-warning, debug. |
| Default Value | All messages with the default severity levels are logged. |
| Allowed Values | A string in the form category=severity1,severity2... |
| Multi-Valued | Yes |
| Required | No |
| Admin Action Required | None. Modification requires no further action |
| Property Group | Filtering Criteria |
| Description | Policy to determine whether the Error Log Publisher should print a message to the log. |
| Default Value | None |
| Allowed Values | The DN of any Error Log Publisher Message Exclusion Policy. |
| Multi-Valued | Yes |
| Required | No |
| Admin Action Required | None. Modification requires no further action |
To list the configured Log Publishers:
dsconfig list-log-publishers
[--property {propertyName}] ...
To view the configuration for an existing Log Publisher:
dsconfig get-log-publisher-prop
--publisher-name {name}
[--tab-delimited]
[--script-friendly]
[--property {propertyName}] ...
To update the configuration for an existing Log Publisher:
dsconfig set-log-publisher-prop
--publisher-name {name}
(--set|--add|--remove) {propertyName}:{propertyValue}
[(--set|--add|--remove) {propertyName}:{propertyValue}] ...
To delete an existing Log Publisher:
dsconfig delete-log-publisher
--publisher-name {name}